Showing posts from September, 2017

What do I do if my hard disk fails to work?

As with most computer errors, your first step is to shut down your computer and restart it. This will help you determine whether or not you actually have a hard disk problem. If the disk is severely damaged then your computer will probably fail to restart properly. If this is the case then contact Solutions, this is a job for the professionals.
Must leave your comments if you got solution of the problem related to the computer's hard disk

My computer does not turn on, what do I do now?

First check the computer's power cord to make sure it is completely plugged into the wall socket. If you are using a plug strip, make sure it is completely plugged into the wall socket and that the power switch on the plug strip is turned on. Some plug strips also have a built in circuit breaker which usually looks like a black or red button near the power switch. Press the button to reset it and see if that solves the problem.↠↠↠ Leave your comments below this post if it solved your issues regarding your computer.

stop windows 7 from automatic updates , stop windows updates , solved

Disabling the Windows Update Service can reduce the number of files that are created and writes that occur when updates are downloaded and installed. This action can reduce linked-clone growth and reduce IOPS in linked clones and full virtual machines. Disable Windows Update Service if you refresh and recompose the linked-clone desktops. A refresh operation restores the OS disks to their original snapshots, deleting the automatic Windows updates. A recompose operation recreates the OS disks from a new snapshot that can contain Windows updates, making automatic Windows updates redundant.
Do not disable the Windows Update Service if you do not use recompose to install Windows updates in the linked clones. The following steps apply to Windows 7 and Windows 8. The steps might vary on different Windows operating systems. Prerequisites Verify that the most recent Windows updates are downloaded and installed on the virtual machine. Procedure 1 to solve your problem through solu…

Create Wifi Hotspot in windows 10 without any software

Windows: If you have a Windows computer with a wired internet connection, you may want to share that with other devices. You can do this with a little command line trickery to turn your desktop into a Wi-Fi hotspot. While technically this has been possible for a while, the process has changed over the years. You can check out the new steps for Windows 10 in the video above from tech blog Techniqued, or follow the steps here: Press Win+X to open the power user settings menu and choose “Command Prompt (Admin)“.Enter the following command, replacing the values for SSID and key with the network name and password you want: netsh wlan set hostednetwork mode=allow ssid=OCHpoint key=passwordRun the following command to start the network:
netsh wlan start hostednetworkSearch in the Start menu for “View network connections.”Right-click your main ethernet connection and choose “Properties.”Under the “Sharing” tab, click the box labeled “Allow other network users to connect through this computer’s i…

What do I do when my computer crashes?

What do I do when my computer crashes? There are many reasons why a computer may just stop working or "freeze". Most of the time there isn't much we can do about it, it is a fact of life that computer programs have become so complex that occasionally users will experience problems even when performing common tasks. When your computer no longer responds to keyboard commands your best bet is to restart the computer.
Good Luck...